The Bitaxe Gamma 601 is a small open-source Bitcoin miner: a single chip, one fan, the power draw of a light bulb and a web interface to adjust it. It is for people who want to understand mining in practice and try their luck solo, not for those looking for an income. This guide covers its specifications, installation, settings, update and your real chances of finding a block.
For the general concepts (pool, overclocking, comparison of home miners), first read our guide Bitaxe: setup, solo mining, overclocking and your real chances of finding a block.
Specifications
| Feature | Bitaxe Gamma 601 |
|---|---|
| Chip | 1 Bitmain BM1370 chip, the chip of the Antminer S21 Pro |
| Hashrate | around 1.0 to 1.2 TH/s |
| Power consumption | around 20 to 21 W at the default setting |
| Efficiency | around 15 to 17 J/TH depending on the source |
| Power supply | 5 V DC, 5.5 × 2.1 mm jack, centre positive |
| Network | 2.4 GHz Wi-Fi only |
| Firmware | AxeOS (ESP-Miner project), open source |
| Cooling | 5 V 4-wire (PWM) fan |
These values vary from one board to another: the actual hashrate depends on the chip, the temperature and the power supply.
Gamma 601 or 602: what is the difference?
The numbers 601 and 602 refer to board revisions of the Gamma family. Both use the same BM1370 chip and the same AxeOS firmware. The 602 is presented as a refinement of the board (layout, components), not as a new generation. The exact differences are not detailed by the sources we consulted.
Some resellers advertise a slightly higher hashrate for the 602, but the gap is within the normal variation from one chip to another. Above all, remember one practical rule: when you flash a firmware, always choose the file that matches your board version, which is printed on the circuit board.
What you need before you start
- A suitable 5 V power supply. It is not always supplied. Plan for 5 V DC, able to deliver more than 4 A without voltage drop. A 5 V / 6 A (30 W) power supply is the prudent reference. A phone charger or a USB-C adapter is not suitable.
- A 2.4 GHz Wi-Fi network. The Gamma does not connect to 5 GHz. If your router merges the two bands, create a separate 2.4 GHz network.
- A Bitcoin address that belongs to you, preferably in bc1q format. Avoid the address of an exchange.
- A pool. For solo mining, for example public-pool.io (port 21496) or solo.ckpool.org (port 3333). Check their terms before connecting to them.
Step-by-step installation
- Plug in the 5 V power supply to the 5.5 × 2.1 mm jack. Never connect a 12 V adapter: the board would be damaged. The USB-C port is for programming, not for powering the mining.
- Wait for it to start, about ten seconds. The Bitaxe creates a Wi-Fi network with no password whose name starts with “Bitaxe_”, followed by a four-character identifier.
- Connect your phone or computer to that network. The configuration page normally opens by itself. If not, type 192.168.4.1 into the browser.
- Enter your 2.4 GHz Wi-Fi: network name and password, respecting upper and lower case. Save: the Bitaxe restarts and joins your network.
- Find its IP address on the Bitaxe screen, then open it in the browser of a device connected to the same network. You arrive in AxeOS.
- Enter the pool: pool address (stratum), port and username. For solo mining, the username is your Bitcoin address, followed if you wish by a dot and the machine name, for example “youraddress.gamma1”. The password is “x” or empty.
- Save, restart, then check that the hashrate climbs towards 1 TH/s and that shares are accepted. Allow ten minutes for the value to stabilise.
Settings: frequency, voltage and temperature
| Profile | Frequency | Core voltage | Expected hashrate |
|---|---|---|---|
| Default setting | 490 to 525 MHz | 1,150 to 1,200 mV | 1.0 to 1.2 TH/s |
| Moderate overclock | 575 to 625 MHz | 1,200 to 1,250 mV | 1.3 to 1.5 TH/s |
These orders of magnitude come from a reseller's guide, not from the official project: treat them as benchmarks, not as guarantees. For the chip temperature, stay between 40 and 65 °C. Above 70 °C, the Bitaxe slows down to protect itself.
In AxeOS, the frequency and voltage fields are locked by default. The ESP-Miner project says you unlock them by adding “?oc” to the address of the settings tab, and warns that overclocking without additional cooling can damage the machine.
Warning. An overclock increases power consumption: an aggressive setting can exceed 35 W, well beyond what a 5 V / 3 A power supply can handle. An underpowered supply causes restarts and an unstable hashrate. Increase in steps of 25 MHz, watch the machine for 15 to 30 minutes at each step, only touch the voltage as a last resort, in steps of 10 to 20 mV, and go back as soon as temperatures or errors increase. To go further, see our general guide to overclocking.
Updating AxeOS
The AxeOS firmware is published in the ESP-Miner repository. At the time of writing, the latest version is 2.15.4, from 21 October 2026. Since version 2.15.0, the web interface is built into the main firmware: there is no longer a separate file for the interface.
- Note down your settings (pool, address, frequency, voltage), because an update may reset them.
- Download the update file for the version you want from the ESP-Miner project's releases page, checking that it matches your board.
- In AxeOS, open the firmware update menu (the exact name varies by version) and upload the file.
- Wait one to three minutes without cutting the power. If nothing happens, wait five minutes before intervening.
- After the restart, check your settings.
Flashing a “factory” image is a different operation: it resets the machine and is done over the USB-C cable. Keep it for recovery cases.
Power consumption and electricity cost
The formula: power in kW × 24 h × 365 days × price per kWh. At 20 W, i.e. 0.020 kW:
- 0.020 × 8,760 h = around 175 kWh per year;
- as an example, at a rate of €0.25/kWh: 175 × 0.25 = around €44 per year.
At 21 W, expect around 184 kWh, i.e. €46 per year at the same example rate. Your actual rate is the one in your contract. An overclock pushes these figures up.
What are the chances of finding a block?
Solo mining is a lottery. With a network difficulty of around 132.7 T (mid-October 2026), we calculated for the Bitaxe GT 800 at 2.4 TH/s about a 1 in 7,500 chance per year. The Gamma 601 has half the hashrate, so half the chances:
- around 1 chance in 5.4 million per day;
- around 1 chance in 15,000 over a year.
It is not zero: Bitaxes have already found a block solo. A Bitaxe of this type is for learning and taking part in the network, not for waiting on a payout. As difficulty rises over time, these chances fall if the machine does not change. The details of the calculation and the comparison of pool and solo are in our article Solo mining or mining pool.
Gamma 601, GT 800 or NerdQaxe++: which should you choose?
The Bitaxe Gamma 601 is not part of our catalogue. Here are the closest models in stock, compared with it:
| Model | Chips | Hashrate | Power consumption | Power supply | Who it is for |
|---|---|---|---|---|---|
| Bitaxe Gamma 601 | 1 BM1370 | around 1.2 TH/s | around 20 W | 5 V, 5.5 × 2.1 mm jack | Discovering mining in the smallest format |
| Bitaxe GT 800 | 2 BM1370 | up to 2.4 TH/s | around 35 to 40 W | 12 V, XT30 connector | A frugal Bitaxe with twice the chances |
| NerdQaxe++ Rev6 | 4 BM1370 | 6 TH/s | around 100 W | 12 V, XT30 connector, power adapter supplied | A more powerful, air-cooled solo miner |
| NerdOctaxe Home 9.6 TH/s | BM1370 | 9.6 TH/s | around 150 W | 12 V | More hashrate for committed solo use |
| NerdOctaxe Home 3.1 | 10 BM1370 | up to 12 TH/s | 240 W | 12 V | The best block chance in the range |
The whole range is in our Bitaxe and solo miners collection. If you also want useful heat, take a look at our Bitcoin heaters and our home miners. Our machines are brand new, tested before shipping, delivered within 7 days, with after-sales service in France.
Troubleshooting: the most common faults
- No “Bitaxe_” network visible. Wait up to a minute, look for a 2.4 GHz network, move closer, or unplug and replug the jack.
- Wi-Fi will not connect. Check the name and password (upper and lower case, special characters), and that your router is broadcasting on 2.4 GHz.
- The dashboard opens but the pool is disconnected. Recheck the address, port and username against the pool's instructions.
- Low hashrate. Below 0.8 TH/s at the default setting, check the power supply, how tightly the jack is seated, the temperature and the heatsink contact. Allow ten minutes of averaging.
- Restarts or overheating. Common causes: an underpowered supply, an overly aggressive overclock, insufficient ventilation. Return to the default settings and improve airflow.
Frequently asked questions
Is the Bitaxe Gamma 601 meant to make money? No. Solo, it tries for a block by lottery, with around 1 chance in 15,000 per year. In a standard pool, its earnings are very small.
Which power supply do you need? A 5 V DC power supply, 5.5 × 2.1 mm jack, centre positive, able to deliver more than 4 A. A 5 V / 6 A is recommended. Never 12 V.
Can you connect it to 5 GHz? No, it only works on 2.4 GHz Wi-Fi.
What is the difference between 601 and 602? Same BM1370 chip, same AxeOS firmware: the 602 is a board revision. Always choose the firmware that matches your version.
What temperature should you not exceed? Aim for a maximum of 65 °C on the chip. Above 70 °C, the machine slows down to protect itself.
A question before choosing a machine? Contact us or call +33 6 32 49 26 41.
Sources
- ESP-Miner (official project), bitaxeorg/ESP-Miner (accessed 18 November 2026)
- ESP-Miner, published releases (accessed 18 November 2026)
- Bitaxe project, bitaxeGamma, hardware files (accessed 18 November 2026)
- D-Central, Bitaxe Gamma setup guide (accessed 18 November 2026)
- D-Central, Bitaxe Gamma 601 vs 602 (accessed 18 November 2026)
- Solomining.de, Bitaxe setup (accessed 18 November 2026)
- Kryptex, Bitaxe Gamma 601 page (accessed 18 November 2026)

