Installation Guide – Antminer KS5 PRO (21 TH/s – Kaspa)
Last updated: July 2025
Recommended pool: our Kaspa pool
Have you just bought an Antminer KS5 PRO 21 TH/s to mine Kaspa (KAS)? This complete guide from Happy Mining takes you step by step through installing and configuring your ASIC miner. We cover the power supply, the network connection, setting up our French Kaspa-compatible pool and the essential checks to optimise your yield.
Whether you are a beginner or an experienced miner, this tutorial will help you get the most out of your KS5 PRO.
The KS5 PRO belongs to the previous generation: this guide remains useful for machines already in operation, but for a new purchase we recommend the Antminer KS7.
1. Unpacking and inspection
-
Unpack the device carefully and check it for any physical damage.
-
Confirm the model: KS5 PRO
-
Check the following:
-
ASIC with built-in control board
-
Power cable(s) (depending on the supplier)
-
Condition of the fans, connectors and screws
-
2. Power supply
-
Required voltage: 220–277 V AC, 47–63 Hz
-
Power consumption: ~3150 W at 25 °C
-
Connector: 20 A cable minimum, PDU ≥ 4000 W recommended
Note: never plug in or unplug the device while it is powered. Switch off the power before any handling.
3. Environmental conditions
| Parameter | Recommended value |
|---|---|
| Temperature | 0 to 40 °C |
| Humidity | 10 to 90% RH (non-condensing) |
| Max. altitude | 2000 m |
-
Install it in a well-ventilated, dry place, protected from dust and moisture.
4. Network connection
-
Connect an RJ45 Ethernet cable between your router/switch and the network port of the KS5 PRO.
-
No Wi-Fi connection is possible.
5. Power-on and access
-
Switch on the PDU, then the device.
-
Wait 1 to 2 minutes for the system to boot.
-
Find the miner's local IP address:
-
From your router (DHCP table)
-
Or using a tool such as Advanced IP Scanner
-
-
Open a web browser and enter the local IP address of the KS5 PRO.
6. Logging in to the web interface
-
Default credentials (if required):
-
Username:
root -
Password:
root
-
-
Once logged in, go to the Miner Configuration tab.
7. Kaspa pool configuration
7.1 Stratum pools to use
Configure the three endpoints below to ensure uninterrupted mining:
| Pool | Address | Port |
|---|---|---|
| Pool #1 | stratum+tcp://kas.ordina-mining.com |
6101 |
| Pool #2 | stratum+tcp://kas-bkp1.ordina-mining.com |
6101 |
| Pool #3 | stratum+tcp://kas-bkp2.ordina-mining.com |
6101 |
7.2 Credential format
-
Username:
kaspa:YOUR_KASPA_ADDRESS.worker-
Example:
kaspa:qq123abcxyz...Bitmain_01
-
-
Password:
x(or empty if accepted)
7.3 Full configuration example
Pool 1:
URL: stratum+tcp://kas.ordina-mining.com:6101
Username: kaspa:qq123abcxyz...Bitmain_01
Password: x
Pool 2:
URL: stratum+tcp://kas-bkp1.ordina-mining.com:6101
Username: kaspa:qq123abcxyz...Bitmain_01
Password: x
Pool 3:
URL: stratum+tcp://kas-bkp2.ordina-mining.com:6101
Username: kaspa:qq123abcxyz...Bitmain_01
Password: x
-
Click on Save & Apply
-
Then check the Miner Status tab
8. Status check
In the Miner Status tab, check the following:
| Item | Expected status |
|---|---|
| Pool | Connection “Alive” |
| Hashrate | Approx. 21 TH/s |
| Temperature | Below 70 °C |
| Fans | Automatic |
| Hardware errors | 0 or close to 0 |
9. Firmware update
-
Go to the official Bitmain website:
https://support.bitmain.com/hc/en-us/categories/115000999127-Product-Manuals -
Download the firmware for the KS5 PRO
-
From the miner's web interface, go to System > Upgrade
-
Upload the downloaded
.tar.gzfile -
Start the update, then restart
10. Maintenance and best practices
-
Clean the device with dry air every 1 to 2 months
-
Monitor regularly:
-
Temperatures
-
Abnormal noise (failing fans)
-
The logs in the web interface
-
-
Do not overclock the device (optimisation is already built in by default)
-
Use a UPS to prevent power surges and micro-outages
11. Useful links
-
Official KS5 PRO specifications:
https://support.bitmain.com/hc/en-us/articles/29937567040153-KS5-Pro-Specifications -
Current generation recommended for a new purchase:
Antminer KS7 -
Our pool dashboard:
open the pool dashboard
12. Final checklist
| Step to confirm | Status |
|---|---|
| Unpacking and inspection | [ ] |
| RJ45 network connection | [ ] |
| Power supply 220–277 V, 20 A | [ ] |
| Local IP found | [ ] |
| Access to the web interface | [ ] |
| All 3 pools configured | [ ] |
| Stable hashrate and temperature | [ ] |
| Firmware up to date | [ ] |
| Maintenance scheduled (dust removal) | [ ] |
We offer the Antminer KS5 Pro 21 TH/s described in this guide, as well as other Kaspa miners.

