Adding a second ASIC can seem simple when the first one is running properly. In practice, this is often when the limits of mining at home show up: an overloaded electrical line, heat building up, noise that is harder to live with, more demanding monitoring. Before growing your Bitcoin mining activity in France, check three points in this order: electrical capacity, heat and noise.
This guide helps you run these checks and choose the right second machine among the Antminer S21, the Antminer S21+, the Fluminer T3 110T and the Avalon Nano 3S, or opt for Happy Mining ASIC hosting. The best ASIC is still the one that matches your electricity, your location, your budget and the level of constraints you can accept. For the basics, also read our guide on how to choose a Bitcoin mining ASIC.
1) Electrical capacity: the first limit
An ASIC runs 24 hours a day at full power. With two machines, two continuous loads add up. The current is easy to work out: divide the power by the voltage (230 V single-phase):
- Antminer S21 151 TH: 2,642 W, about 11.5 A;
- Antminer S21+ 235 TH: 3,877 W, about 17 A;
- Fluminer T3 110T: 1,625 W, about 7 A;
- Avalon Nano 3S: 140 W, less than 1 A.
Two S21 151 TH therefore draw about 23 A continuously, more than a 16 A or 20 A circuit can handle. Each ASIC of this size needs its own dedicated line, with a suitable breaker and cable cross-section, installed by an electrician. Also check the subscribed power of your electricity contract: 5.3 kW of continuous mining plus household consumption exceeds a 6 kVA subscription and can saturate a 9 kVA one. Our electrical installation guide explains how to calculate the current and which protection devices to plan.
2) Heat: two machines, two heaters running non-stop
An ASIC returns almost all of the electricity it consumes as heat. With two S21 151 TH, more than 5 kW are released continuously into the room, summer and winter alike. A room that coped with one machine can become too hot with two: the intake air temperature rises, the machine lowers its frequency or goes into protection mode, and output drops.
Before adding the second machine, plan a fresh-air inlet and a hot-air extraction to the outside sized for all the machines, making sure one does not draw in the air rejected by the other. Our ventilation guide explains how to prepare the installation. In winter this heat can be useful: that is the idea behind the Fluminer T3, designed to mine Bitcoin while heating a room.
3) Noise: what changes with a second machine
An air-cooled ASIC such as the S21 or S21+ produces about 75 dB. Two identical machines side by side do not make 150 dB: the level rises by about 3 dB. But two noise sources are harder to soundproof than one, and the noise is there day and night. If your first machine is already at the limit of what is acceptable, a second air-cooled machine rarely will be.
The quieter alternatives are the Fluminer T3 (45 dB), the Avalon Nano 3S (33 to 40 dB) and the other machines in the Home Miner collection. To go further, see our article on Bitcoin ASIC noise.
4) Products to compare for a second machine
| Product | Power consumption | Noise | Who it is for |
|---|---|---|---|
| Antminer S21 151 TH | 2,642 W (≈ 11.5 A) | 75 dB | The same size as a first S21: one more dedicated line and stronger air extraction. |
| Antminer S21+ 235 TH | 3,877 W (≈ 17 A) | 75 dB | More hashrate, for an installation with real electrical and thermal headroom. |
| Fluminer T3 110T | 1,625 W (≈ 7 A) | 45 dB | Compact, quieter alternative if the second machine has to remain acceptable at home. |
| Avalon Nano 3S | 140 W | 33 to 40 dB | Home miner to extend a learning-focused setup without changing rooms. |
| Happy Mining ASIC hosting | None at your home | None at your home | The preferred solution if the second machine would push your home beyond its limits. |
New generations such as the Antminer S23 (305 TH/s announced for 3,500 W) mainly gain in efficiency: the power to connect, the heat and the noise per machine stay in the same range as an S21. The same checks apply.
5) How to read a product page effectively
An ASIC product page should be read as a whole: hashrate, power consumption, efficiency, power supply, noise, dimensions and warranty. For a second machine, look first at the power consumption, which sets the current to plan for, then at the noise level and the cooling method. A very powerful machine can be the wrong choice for you if it requires building work, cooling you had not planned for or a noise level you cannot accept.
To assess the real cost, start with our method to calculate the profitability of a Bitcoin ASIC based on electricity, counting the consumption of both machines. Then add the practical costs: new electrical line, cables, ventilation, air extraction, space, monitoring and, where applicable, hosting.
6) When should you add a second machine?
Adding an ASIC makes sense if your first machine is already running stably and you have measured its power consumption, temperature, noise and actual uptime. If not, stabilise the first one first. For monitoring, each machine appears as a separate worker on your pool: give them clear names so you can quickly spot the one that drops out.
If electrical capacity, heat or noise stand in the way, an Avalon Nano 3S, the Home Miner collection or a hosting solution are a better fit.
7) Checklist before you order
- Total current calculated and a dedicated line planned for each ASIC.
- Subscribed power of your contract checked.
- Fresh-air inlet and hot-air extraction sized for all the machines.
- Total noise acceptable for you and your neighbours, day and night.
- kWh price known and monthly cost estimated for both machines.
- Clear decision between mining at home, hosting or a home miner.
FAQ
Can two ASICs be connected to the same circuit?
Not for machines like the S21: two S21 151 TH draw about 23 A continuously, more than a 16 A or 20 A circuit. Each machine needs its own dedicated line.
Should you buy the product with the highest hashrate?
Not always. Hashrate alone is not enough: profitability also depends on efficiency, the kWh price, practical costs and stable uptime. For a second machine, the electrical and thermal headroom of your room matters as much as the power.
When does hosting make sense?
Hosting makes sense when noise, heat, electricity or monitoring make mining at home complicated. Read our article on hosting vs mining at home.
What should you choose to learn without taking a big risk?
To learn the easy way, an Avalon Nano 3S or a product from the Home Miner collection is often more comfortable than a large ASIC.
Conclusion
Adding a second Bitcoin ASIC is decided first on three limits: electrical capacity, heat and noise. If all three are cleared, a second machine identical to the first is often the simplest choice; otherwise, a quieter machine or hosting avoids putting your installation at risk. We can help you compare product pages and choose a suitable solution, at home or with hosting.

